? For the Tooner crowd

I now have a ODC 816 inflatable .....
Just purchased a set of (NEW) 1018 pontoons and seat along with some other misc.
The 1018 must ship in (2) cartons, one in which is incomlete, no sure what hardware is missing .

So, will the 1018 bladders strap onto my 816 frame?

Thanks in advance
Most likely it'll work. Only one way to find out though...is to try it. Depends mostly on the curvature of the frame vs tube.

The quick clip pins are easy to pick up from mcmaster.com


Active Member
Should work fine, even if curve of 10ft tubes is a tad larger than that of the frame. There will be sufficient contact with longintudinal rails of the frame. Just keep your straps nice and snug.