Airflo Super-Dri Elite

Discussion in 'Fly Fishing Forum' started by Brian Miller, Jul 31, 2013.

  1. Brian Miller Be vewy vewy qwiet, I'm hunting Cutthwoat Twout

    Posts: 879
    Ratings: +66 / 0
    Had a pretty good day on the upper Yakima yesterday but noticed I had a bad cut about 3 feet from the tip of my fly line so I will need to replace it. Anyone tried the Airflo Super-Dri?
  2. Nooksack Mac Active Member

    Posts: 1,945
    Bellingham, WA, USA.
    Ratings: +109 / 0
    If the cut isn't into the line core, you can probably repair it. If you're a fly tier, use your thread bobbin to fill the cut with fine thread. (Or borrow one from a fly tying buddy.) Hold the line horizontally on either side of the cut, and swing the bobbin like a yo-yo in rotations around the line cut. Use a pull loop to bury the thread end, like adding a new guide to a rod blank. Cover the thread with thin glue or cement. If you can't save the line's tip, keep the line and splice in a section of sinking line to make it a useable sink-tip.
    Kyle Smith likes this.