Casting for Recovery rod

Discussion in 'Rod Building' started by NIrodneck, Sep 10, 2011.

  1. NIrodneck

    NIrodneck Active Member

    Joined:
    Jul 7, 2008
    Messages:
    180
    Likes Received:
    32
    Location:
    Dover,ID
    I also belong to rodbuildingforum.com and the builders took up the CFR cause. I believe it was 23 builders built rods to donate to this and this is my rod. We all built on a RX6 8' 4pc 5wt blank. The grip is a pink and brown hybrid carbon fiber grip. The reel seat insert and winding check are juniper from the shores of Lake Pend Oreille. The seat is a BUL5 and the wraps are garnet and teal with CP and the guides are pacbay single foots. Tfhe decal is the CFR logo on holographic deal media.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. CC898

    CC898 Member

    Joined:
    Oct 14, 2010
    Messages:
    230
    Likes Received:
    2
    Location:
    Montana
    Stunning! Nice work for a great cause! Way to go.:thumb:
     
  3. idahokid

    idahokid David Willey

    Joined:
    Nov 17, 2009
    Messages:
    167
    Likes Received:
    0
    Location:
    Hayden Lake,Idaho
    I think I seen this rod in Orvis with Pat and Mike.A few weeks ago?
     
  4. NIrodneck

    NIrodneck Active Member

    Joined:
    Jul 7, 2008
    Messages:
    180
    Likes Received:
    32
    Location:
    Dover,ID
    Could be. It was auctioned off on Oct. 15 in Post Falls at the CFR fundraising banquet.