? For the Tooner crowd

Discussion in 'Watercraft' started by Davepa, Jun 12, 2012.

  1. Davepa

    Davepa New Member

    Joined:
    Feb 23, 2012
    Messages:
    12
    Likes Received:
    0
    Location:
    LaVale, Maryland
    I now have a ODC 816 inflatable .....
    Just purchased a set of (NEW) 1018 pontoons and seat along with some other misc.
    The 1018 must ship in (2) cartons, one in which is incomlete, no sure what hardware is missing .

    So, will the 1018 bladders strap onto my 816 frame?

    Thanks in advance
    Dave
     
  2. veilside180sx

    veilside180sx Member

    Joined:
    Apr 3, 2008
    Messages:
    295
    Likes Received:
    1
    Location:
    Hillsboro, OR
    Home Page:
    Most likely it'll work. Only one way to find out though...is to try it. Depends mostly on the curvature of the frame vs tube.

    The quick clip pins are easy to pick up from mcmaster.com
     
  3. ten80

    ten80 Active Member

    Joined:
    Sep 20, 2009
    Messages:
    516
    Likes Received:
    84
    Location:
    Anchorage, AK
    Should work fine, even if curve of 10ft tubes is a tad larger than that of the frame. There will be sufficient contact with longintudinal rails of the frame. Just keep your straps nice and snug.
     

Share This Page