Glue/Adhesive question...

Discussion in 'Rod Building' started by kdog0027, May 8, 2011.

  1. kdog0027 Membership Pending

    Posts: 32
    Yakima, WA
    Ratings: +0 / 0
    I just picked a GLoomis 9 wt at a garage sale that has a loose fighting butt. It comes pulls out cleanly and looks to be a straight forward repair. What kind of glue or adhesive should I use? Thanks in advance for your thoughts.

    Mark
    kdog0027, May 8, 2011
    #1

  2. WABOWMAN Member

    Posts: 379
    Port Townsend,WA
    Ratings: +23 / 0
    You can go down to the hardware store and get some 15min clear epoxy.That will take care of it.
    WABOWMAN, May 9, 2011
    #2

  3. kdog0027 Membership Pending

    Posts: 32
    Yakima, WA
    Ratings: +0 / 0
    Thank you much!
    kdog0027, May 9, 2011
    #3

  4. Craig Hardt aka Nagasaurus

    Posts: 146
    Lynnwood, WA
    Ratings: +1 / 0
    And rubbing alcohol plus paper towels at the ready to clean off the excess epoxy that will inevitably squeeze out when the pieces are put back together. With 15 minutes you won't get much cleanup time.
    Craig Hardt, May 9, 2011
    #4