How to seperate corroded alumimum oar?

Discussion in 'Watercraft' started by lastcall, Jul 27, 2010.

  1. lastcall

    lastcall Member

    Joined:
    Oct 2, 2002
    Messages:
    177
    Likes Received:
    4
    Location:
    Bellingham, Wa, USA.
    I just purchased a used pontoon that came with two part aluminum oars. One of the oars has corrosion in the joint and I can not get it to seperate. Any suggestions / ideas?
     
  2. KerryS

    KerryS Ignored Member

    Joined:
    Oct 19, 2001
    Messages:
    7,072
    Media:
    8
    Likes Received:
    2,181
    Location:
    Sedro Woolley, WA, USA.
    Penetrating oil like WD40 or Liquid Wrench sprayed liberally on the joint then let it sit for a couple of hours. Perhaps a little heat from a heat gun or hair dryer would help also.
     
  3. Josh Smestad

    Josh Smestad aka Mtnwkr

    Joined:
    Jul 11, 2007
    Messages:
    634
    Likes Received:
    81
    Location:
    Bremerton, Wa
    Amonia will eat away the corrosion.
     

Share This Page