Oars on the Outlaw rampage

Discussion in 'Watercraft' started by claus, Feb 13, 2011.

  1. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
    I bought a Rampage model with Dave scadden. First there was the leaky valves, so I got someone new. I got tested the boat with the standard OARS that comes with the boat. I do not understand that they make a boat, where you can only give quart gas because of the implications such a shitty oar with the boat. The standard oar costs $23 What's going on in Dave scadden

    I've seen youtube videos where he have some oars, which are black shaft, white paddles, and red handle grip.

    Does anyone know where they can be bought and what they cost. I would not have the yellow carbon oar. Or those with orange paddle as I've seen on video also.

    he does not make some video clip where he uses the standard OARS I wonder why :). :beathead:

    what has the experience with the standard aluminum oar is in the boat


    thanks for helping all
     
  2. mojo

    mojo Member

    Joined:
    Feb 25, 2007
    Messages:
    109
    Likes Received:
    2
    Location:
    Yewtah
    I didn't understand a word you said.
     
  3. Rod Wittner

    Rod Wittner Active Member

    Joined:
    Aug 28, 2010
    Messages:
    588
    Media:
    2
    Likes Received:
    80
    Location:
    West Richland, WA
    I think he's DWT..... Drinkin' while typin'
     
  4. Ed Call

    Ed Call Mumbling Moderator Staff Member

    Joined:
    Jun 9, 2008
    Messages:
    17,862
    Media:
    283
    Likes Received:
    1,671
    Location:
    Kitsap Peninsula
    Welcome to the greatest fly fishing forum on the planet. Sad that your first post is an incoherent railing on a major equipment manufacturer. Hope your future posts are more informative or entertaining.
     
  5. Evan Salmon

    Evan Salmon Member

    Joined:
    Jun 10, 2008
    Messages:
    218
    Likes Received:
    17
    Location:
    Onalaska, WA
    You can buy any size shape and configuration of oar from just about any pontoon or drift boat manufacturer or decent sized retailer.... Try Cabelas first.

    At least that's what I think you were asking?
     
  6. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
    thanks

    sorry for my bad english. I´am not from Usa
    From europe

    Thanks anyway.

    What I´am asking is, that the oar´s that comes with the Outlaw Rampage, is a piece off S......

    What do you mean about the standard oars
     
  7. Jim Wheeler

    Jim Wheeler Full time single dad and pram builder

    Joined:
    Apr 26, 2003
    Messages:
    143
    Likes Received:
    44
    Location:
    Tonasket, WA
    Home Page:
    Claus,

    The carbon oars Scadden touts were actually developed by us probably 6-7 years ago and are built by Sawyer Paddles and Oars in Oregon. After testing we decided to go to an aramid fabric instead which increses the flex of the oar and are just as strong making them more comfortable to row with. You might be able to get them through Sawyer, maybe from Scadden and for sure from us. They aren't cheap ($205 for 6 1/2') but they are the best oar you will ever buy.

    Jim Wheeler
    Spring Creek Prams
     
  8. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
    Thanks

    Can you tell me if i could bye it from you ?

    and the price, maybe some pictures
     
  9. Blue

    Blue Active Member

    Joined:
    Nov 15, 2006
    Messages:
    1,228
    Likes Received:
    124
    Location:
    Salt Lake City, UT
    Home Page:
    First off, the frameless models DO require a special oar with the hole in the middle. So, you have to pick the oars that will work with that.
    The Carbon yellow Oars are not made for the frameless, but he does sell some custom oars.
    I can't speak for the Rampage, but the oars that come stock with the Renegade although, a little shorter that I like, work just fine. All in getting use to them and that only takes a few strokes. They are made shorter for pack ability. A little give and take.
     
  10. Rob Ast

    Rob Ast Active Member

    Joined:
    Apr 18, 2005
    Messages:
    1,964
    Media:
    36
    Likes Received:
    260
    Location:
    West Pugetopolis WA
    Blue,

    There is a version of the yellow carbon oar drilled for the pinon oar locks - I have em.
     
  11. Blue

    Blue Active Member

    Joined:
    Nov 15, 2006
    Messages:
    1,228
    Likes Received:
    124
    Location:
    Salt Lake City, UT
    Home Page:
    That's right, I remember someone saying that awhile back...LOL I was looking at the older NFO catalog. But of course, why wouldn't there be.
    At any rate, they are special oars with a hole in them, that is all. I have them but no hole, for my X5. I can go from longer carbon oars on my X5 to the shorter stock ones on my Renegade and adjust pretty easily is all I am saying. I don't think the oars suck, just different.
    Just my opinion though...others may vary...LOL
     
  12. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
  13. Blue

    Blue Active Member

    Joined:
    Nov 15, 2006
    Messages:
    1,228
    Likes Received:
    124
    Location:
    Salt Lake City, UT
    Home Page:
    Yes!!!!! They are like sling shots...you can really fly with them. There is a big difference, but in addition to that...do you need them? No, but they do make it easier and faster, and soooo much nicer.

    I will admit, I am awaiting a pair myself.
     
  14. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
  15. Blue

    Blue Active Member

    Joined:
    Nov 15, 2006
    Messages:
    1,228
    Likes Received:
    124
    Location:
    Salt Lake City, UT
    Home Page:
    Visibility I am guessing. Just like HIS Omega fins had to be YELLOW. If they fall off, you can see them.
     
  16. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
    Maybe dave like colors. Hahaha

    Or he is colorblind.

    Red boat, fit black colors. Not orange. Bumb
     
  17. Blue

    Blue Active Member

    Joined:
    Nov 15, 2006
    Messages:
    1,228
    Likes Received:
    124
    Location:
    Salt Lake City, UT
    Home Page:
    Doesn't do much for the Blue boats either...Now if he just - still made YELLOW boats, but, Nooooo. People whined that they got too dirty.

    A good thing there is MATCHING Flippers for you ......fashion conscious tooners

    [​IMG]
     
  18. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
    nice shoes . I will wait for the oars from dave scadden
     
  19. Blue

    Blue Active Member

    Joined:
    Nov 15, 2006
    Messages:
    1,228
    Likes Received:
    124
    Location:
    Salt Lake City, UT
    Home Page:
    Are you going with the Lite Speed oars? Cause on his site, they have Yellow Blades and Red handles. Those ones Of Mikes where first tries...allot has happened since then.
    But the Carbon Oars are like TYE DYE all sorts of colors.
     
  20. claus

    claus New Member

    Joined:
    Feb 13, 2011
    Messages:
    8
    Likes Received:
    0
    Location:
    Virginia
    As i Said. Dave told me that they only have the light speed oars with black stick, orange paddle and red handle grip. Thats the oars i Will get.

    And i hope they work better than the standard aluminium oars

    He dont have White or black paddle. So if i dont Like orange. Then i Will paint them black.
     

Share This Page