Ok, final list and instructions for buying the bulk tubing

Discussion in 'Fly Tying' started by Jerry Daschofsky, May 17, 2009.

  1. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    When I'm done distributing out the tubes, I should have quite a bit left over (I'm buying almost $100 worth). Could sell you some after all the tubes are out. As of right now, they could have it extruded and ready to ship. I haven't heard back from supplier yet.
     
  2. Ricky Bobby

    Ricky Bobby New Member

    Joined:
    Jan 11, 2008
    Messages:
    65
    Likes Received:
    0
    Location:
    Texas, Motor Speedway (Well Close)
    Good deal. Let me know. Thanks.
     
  3. Jim Wallace

    Jim Wallace Smells like low tide

    Joined:
    Jan 23, 2004
    Messages:
    5,724
    Likes Received:
    571
    Location:
    Somewhere on the Coast
    Thanks again for doing this, Jerry. You rock!
     
  4. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    Should be extruded this coming week. So hope to have it pretty quick. Price went up per foot. Like $0.005. LOL. Found out I had been mistaken. I thought it would be a darker walled stuff. He quoted me on the EXACT same stuff you get from HMH. So it'll be the same clear tubing from them.
     
  5. ridderbos3

    ridderbos3 New Member

    Joined:
    Dec 29, 2008
    Messages:
    10
    Likes Received:
    0
    Location:
    kalamazoo, Michigan
    After the extruding is done, about how long will it be for them to ship it to you, and then you to us? (those of us that do not live close?)

    John
     
  6. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    I've never dealt with them before. I'll have to contact him and ask. He's a bear to get in touch with. Usually takes a couple days for him to get back to me on anything. Will toss that email out and see what he says.
     
  7. SpringCreek

    SpringCreek Addicted to Cane.......

    Joined:
    Mar 15, 2008
    Messages:
    107
    Likes Received:
    3
    Location:
    Vancouver, WA
    Any update on the status of the order?
     
  8. Leroy Laviolet

    Leroy Laviolet Aint no nookie like chinookie

    Joined:
    Apr 22, 2008
    Messages:
    994
    Media:
    24
    Likes Received:
    0
    Location:
    do'n it 4 the chinookie
    Any update ???
     
  9. Richard Torres

    Richard Torres Active Member

    Joined:
    Jan 16, 2003
    Messages:
    1,384
    Media:
    11
    Likes Received:
    86
    Jerry you're killing me! I don't know if I can come up with the extra amount....
    I want my money back! :clown:

    Seriously, I too want to thank you for taking the time to do this during the unfortunate crisis you had to go through last summer. I don't blame you for wanting to move on..

    Richard
     
  10. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    Ok, I've got a few emails. It's about only thing besides facebook I can check on my phone. I'm a UPS driver, and tis the season, so I won't be online much and haven't been. So I'm not ignoring this thread. Last thing on my mind these days is jumping on the computer.

    Here's the update. The order is in, but he was holding extruding until he got my credit card since I wasn't buying under my customers PO. I sat on hold for over 30 minutes during my lunch to avoid the constant phone tag we were playing. He said it should take about 3 weeks total once the card is in (which was over a week ago). So hope to have it in the next two weeks. I'm glad I did, or it would've been alot longer out. I won't be online much, and have to have abscessed molars removed next Friday. So REALLY won't be online much. But moment they hit my doorstep I'll let everyone know.

    And trust me, I want this stuff to come in too. I had to make a special hareline order to buy more of the smaller tubing. Even at my pro cost, it's still expensive per foot.
     
  11. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    Ok, I haven't heard from them, but I have a pending withdrawal on my account (usually when my card is run as a credit vs debit) for the amount of the tubing. So hope to see it come sometime this week. Will shoot out an email and see what the status is. But I do show a pending withdrawal for the correct amount of the tubing. :)
     
  12. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    I've been contacted, and they are going to try and get it shipped this week or first of next. He's guestimating it going out the 28th with Christmas and all (I know I don't want to be at work, probably same for their employees).
     
  13. ralfish

    ralfish Active Member

    Joined:
    Feb 12, 2006
    Messages:
    300
    Likes Received:
    51
    Location:
    B.C.
    whoooo hoooo
     
  14. Ricky Bobby

    Ricky Bobby New Member

    Joined:
    Jan 11, 2008
    Messages:
    65
    Likes Received:
    0
    Location:
    Texas, Motor Speedway (Well Close)
    Did I mention I would love to get some of this stuff... let me know where to send the check and how much you have left over..

    I appreciate it.
     
  15. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    I'll know when I have it all in and seperated how much I have left over after my share. Depending on how much I have I may have a little left over to sell off.
     
  16. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    For those who need their tubing shipped

    I know I had a few emails saved that had updated addresses. ALL of you who are having their tubing shipped, please PM me with current mailing addresses. I'm hoping to have the tubing sometime next week. Thanks. :)
     
  17. ralfish

    ralfish Active Member

    Joined:
    Feb 12, 2006
    Messages:
    300
    Likes Received:
    51
    Location:
    B.C.
    Any updates?
     
  18. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    I HAVE TUBING!!!!!

    Took the light of day to see it. Walked right by it last night when I came home from work. But the tubing is here. I'm going to figure out exactly what the cost was including the shipping costs. That way I can divy up the tubes by what you paid. Then get mailers for those out of state and then setup relays/meetpoints to drop them off. They look good though. :)
     
  19. jeff bandy

    jeff bandy Make my day

    Joined:
    Jan 19, 2006
    Messages:
    2,649
    Media:
    2
    Likes Received:
    584
    Location:
    Edmonds, Wa.
    Jerry rocks, you can just bring mine to the Hohdown.
     
  20. Jerry Daschofsky

    Jerry Daschofsky Moderator Staff Member

    Joined:
    Feb 26, 2003
    Messages:
    8,066
    Media:
    453
    Likes Received:
    810
    Location:
    Graham, WA, USA.
    Home Page:
    Will do Jeff. :) I'd like to get as many trade offs as possible. And to those who have asked via PM. I DO NOT get a discount shipping UPS. They don't give employees discounts on the shipping. So I pay what you pay. I'll be shipping them via USPS in tubes.
     

Share This Page