rod building dvd

Discussion in 'Rod Building' started by flytyingfred, Feb 14, 2012.

  1. flytyingfred New Member

    Posts: 20
    middlebury center pa.
    Ratings: +2 / 0
    Does anyone have any input about a good rod building dvd? I was going to order the flexcoat dvd but it has a lot of bad reviews: picture quality,not step by step etc. so I passed on that. I was looking at the Russ Gooding dvd which is a 2 dvd set and goes about 3 hrs.. I do have a book by Dale Clemens but its harder for me to read about a process than it is actually seeing it done. You know "A Picture is worth a thousand words". any suggestions are welcome and thanked in advance.
    flytyingfred, Feb 14, 2012
    #1

  2. WABOWMAN Member

    Posts: 384
    Port Townsend,WA
    Ratings: +23 / 0
    Take a look on youtube.There are a ton of videos there and they are free!
    WABOWMAN, Feb 14, 2012
    #2

  3. NIrodneck Member

    Posts: 147
    Dover,ID
    Ratings: +11 / 0
    Mudhole also has a lot of rodbuilding videos to look at.
    NIrodneck, Feb 14, 2012
    #3

  4. Rob Ast Active Member

    Posts: 1,658
    West Pugetopolis WA
    Ratings: +89 / 3
    I agree about the mud hole videos. Short and to the point. Go to their home page and look for the education link.
    Rob Ast, Feb 14, 2012
    #4

  5. Dr Bob Member

    Posts: 183
    Woodinville, WA
    Ratings: +9 / 0
    Dr Bob, Feb 16, 2012
    #5

  6. BRYORS Member

    Posts: 143
    Camas, Wa
    Ratings: +1 / 0
    Go to www.flyrodfanatic.com this is a 22 part series that has great information. It is all on youtube and the price is right.
    BRYORS, Feb 20, 2012
    #6

  7. jar8 Member

    Posts: 38
    Federal Way WA
    Ratings: +0 / 0
    +1 on flyrodfanatic.com,is very well explained and the price is.right.is the one I'm following and so far so good.
    jar8, Mar 20, 2012
    #7