Z-Axis 9143-4 Line Recommendations

Discussion in 'Spey Clave' started by MallardDuck, Mar 2, 2008.

  1. MallardDuck New Member

    Posts: 4
    Washington
    Ratings: +0 / 0
    Hello All-

    New to the board here....I was wondering what you all recommended for a Z-Axis 9143-4 in regards to lines. I have a windcutter 8/9/10 now, but wondered what else folks had success with...

    Thanks
  2. SPEYBUM Member

    Posts: 271
    CARNATION, WASHINGTON, USA.
    Ratings: +0 / 0
    RIO AFS 8/9 at 520 grains
    RIO Skagit 600 grains
    RIO Powerspey 8/9 at 640 grains
    RIO Windcutter 8/9/10 at 585 grains
    AIRFLO Delta 8/9 AT 600 grains
    I have had 9143 Z-Axis in the Rod Pool for about Two years now and have had good success with the following lines.
    The rod seems to have a grain window from 500 grains to about 700 grains.
    You if you want the heavy feel go heavier or go light if want more line speed.
    I have some of these lines in the Line Pool

    The best way for you to know what you want is to try a few lines.

    Let me know if I can help
  3. fredaevans Active Member

    Posts: 3,116
    White City, Oregon, USA.
    Ratings: +118 / 0
    Aaron's covered the ground quite nicely .. only thing I might add (if you're into spending 'big bucks' on a hell of a full dry line would be the 9-10 Carron line. If memory serves, Aaron also carries these.

    Fred