CHIRONOMID THREAD -

#46
You don't use two hooks to catch two different fish. You use two different hooks to see what they are keying in on.

Hi Blue,
With all due respect, I really don't care about hooking two fish at a time. That is just a distraction to me, a bother... and also I hate foul hooking fish and two flies result in too much of that... especially when they are so close...i wouldn't smoke two quality cigars at a time or drink two glasses of wine.....
Like I said I have seen it over and over fishing side by side with a "two fly guy" and I have not seen any net advantage...I have actually seen the opposite.......

Regards....Paul
 
#47
Two glasses of crown royal is always better that one!

This is a fantastic thread. I'm gonna experiment with furled leaders. Never tried them but I have heard great things. I don't use split shot. I often use a barrel swivel for a little weight and the ability to quickly change
tippets. Then most of my patterns are weighted a bit. Often. I will fish a weighted micro leech with a mid dropped behind it. The leech gets the fly down quick and I believe acts as an attractor. When out in the boat I don't mind waiting an extra little bit for the flies to get down.
 
P

pond monkey

Guest
#48
Hi Caveman,
I mentioned that because Blue said that she enjoys catching two at a time...... Like I said i have fished hundreds of hours side by side anchored up in my boat with a two fly guy and most of the time if not all of the time I do better.... with a single fly...... and never foul hook fish.
Fishing out of a boat with a fish finder and always knowing the depth is a huge help especially in deeper zone.......if you are not getting bit within ten minutes then raise your fly or move....
PS.... btw....you pump fish to see what they are eating....

Regards.....Paul
 

Blue

Active Member
#49
Whatever trips your trigger and hook choice also equals fouls. I hate that as well, so ....I don't do it :)
I prefer a bicycle over a Uni cycle, what can I say, but don't smoke and don't drink wine so can't answer that, plus not sure what that means.
Most people that fish next to me end up rigging like I do......he, he, he

I did want to add as far as the dropper beads however, they are easy to adjust different depths. Just slide up or down.
 
#50
I have always wondered this and received several different answers when I asked.....

If I'm out on a lake and come across a ton of schucks in the water does this mean the mids are currently hatching, or is it more likely this is a sign of a previous hatch?
 
P

pond monkey

Guest
#51
Nick,
IMHO.... Those rafts of floating exoskeletons are not even necessarily from a chironomids hatching for starters.....could be Caddis... like the ocetis....they hatch at dawn or even pre dawn or maybe callibaetis .... some chironomids hatch at dusk or later...I suppose they could stay afloat for up to to 24 hours... and a little wind would sweep them into rafts...
When a hatch is actually in progress you will see emerging pupae and adults flying off just like a mayfly hatch... so IMHO those floating exoskeletons are from a previous hatch.....
One thing to consider is where are you seeing these husks? .... peppered out in open water spread out somewhat ( recent hatch) or all concentrated and up against shore. (older hatch...maybe a day or more )


Paul
 
#53
What kind of epoxy are you using on the Chironomids?

Wohoo, I love fishing Mids. I do it from a pontoon but also off shore lines. I do have to guess off the shores on the depth. On stillwater, I either use sonar to get the depth, or I use one of those sinkers with a roach clip for ice fishing. I clip it on the bottom fly and drop it to the bottom. I then raise it a foot and set the indy.
When fishing with sonar I can see the depth and adjust easier. I will use a Type VII line or I will use floating with a slip indicator. As I have mentioned before I use up to 30' leader. I use the same indicators as Chan also. I have learned that if I drill the hole out on the peg of the indicator, I can use one of my furled leaders. Reason I like this is it allowes me to be able to cast a 20' leader with ease instead of lobbing it out there.
I would like to share some of my Chironomids with you.








Off a swim hook

And don't forget, BUZZERS
 
#55
I used to use Sally Hansens, Just cause I had it around for steelhead and atlantic salmon fly heads, but the the last few years I've been using more
Loon's Hard Head clear for pupa bodies and have had good luck with it, I think it might hold up a little better, and can be thinned with water, but not
sure if it really makes that much difference.

Blue, your pupa's are really nice ties, thanks for sharing them. On smaller flies (20, 18, 16) I keep it real simple, bead and tapered body and thats all,
seldom even a rib, it doesn't seem to help to add anymore. When I'm lucky enough to get to use anything larger I'll put ribs and gills on them, but still
not sure if they are that much more affective, at least where I fish. Love watching that indicator disappear....
 
P

pond monkey

Guest
#56
Sally's is good stuff and it is best/ easiest to use without before it gets too thick. When it gets too thick it does not flow on evenly and dries too slow ( three coats or more) ..... by the time a bottle is half empty it is getting too thick. I still keep it around though and use it coat my "quick release indicators".... two coats toughens them up a little but also makes 'em shinny so they reflect more light and show up better... on those cloudy, choppy days.... also can be used to coat and smooth over nail knot connections... also it helps to take the original brush and trim it down with to make it thinner and bring it to a point...

I like your buzzers Blue....I have been tying them for eight or nine years.... don't know if you weight yours but you can get the thin lead shields from your dentist they are 1.25" X 1.5' and .003 " thick.... cut 1/8 strips then lay and secure with thread on top of hook in thorax area..... then add a second.... then a third.... each a little shorter( to taper) next the other then cover with thread, and add cheeks (wing buds) if desired...

PM
 

Blue

Active Member
#57
I basically use ribbing to bullet proof the flies from tiny teeth, plus an easy extra weight. Can't imagine a Zebra Midge without it's rib...LOL
I have a bottle of Hard Head that was given to me at a fly tying show, I guess I need to try it. But, some epoxy turn yellow, do you know if this does?

Pond, I do use weight wire in the thorax area. I build them like Davie McPhail. I also have Biot in every color imaginable for the gills.
 
P

pond monkey

Guest
#58
Blue...I don't see anatomically correct gills on your buzzers.... actual gills are white little filaments almost always on the abdomen end .... some species have gills on both ends..... looks like the biots that you refer to are being used for what the Brits call cheeks but they actually represent pre emergent wings or wing pads....

Respectfully....Pond Monkey

ps don't know if epoxy turns yellow..... Sally's is so easy to use... plus it's tough and clear....and cheap....
 
P

pond monkey

Guest
#60
Electric blue, wow!.... that's the British for you....It goes to show you that trout primarily feed opportunistically I guess ... of course in England there are more than one thousand pay to play venues....mostly small ponds....and most raise their own fish to maturity in their own "stew ponds." .... very different than the US and Canada.... These small stillwaters in the UK are common and not expensive though and are the main opportunity for the average citizen to cast a fly.... there are a few public reservoirs with good fishing but ya need a boat and the chalkstreams are all controlled by private clubs.