Building a Rod Carrier for your vehicle

Discussion in 'Fly Fishing Forum' started by Andrew Shoemaker, Mar 11, 2014.

  1. Andrew Shoemaker

    Andrew Shoemaker Active Member

    Joined:
    Nov 22, 2013
    Messages:
    208
    Likes Received:
    76
    Location:
    Olympia, WA
    Has anyone ever built a rod carrier to secure to your roof rack? I've seen the metal boxes online for like $600 and even the rod tubes seem expensive. Wondering if anyone has built their own on top of car transport carrier. Did you use PVC, did you weld metal, etc, etc? I want to make my own for my subaru.
     
  2. Travis Bille

    Travis Bille Active Member

    Joined:
    Oct 12, 2010
    Messages:
    774
    Likes Received:
    464
    Location:
    McKinleyville, CA
    I used PVC, then epoxied a toolbox the the back so the reels sit inside it. If you do the toolbox, make sure it opens down so it stays open when you are sliding your rods in. I wish it was light out, I would post a pic. I'll try to remember tomorrow.

    I've had mine on for two years and so far they've been durable and work great.
     
    Andrew Shoemaker likes this.
  3. Andrew Shoemaker

    Andrew Shoemaker Active Member

    Joined:
    Nov 22, 2013
    Messages:
    208
    Likes Received:
    76
    Location:
    Olympia, WA
    A pic would be awesome!!
     
  4. Salmo_g

    Salmo_g Active Member

    Joined:
    Nov 18, 2004
    Messages:
    8,742
    Likes Received:
    3,139
    Location:
    Your City ,State
    A friend used schedule 40 PVC pipe to make a rod carrier that he attached to the boat rack on his pickup canopy. He used it to carry rods strung up while fishing, but it wasn't secure enough to prevent theft.

    Sg
     
  5. Luke77

    Luke77 I hope she likes whitefish

    Joined:
    Jun 23, 2009
    Messages:
    1,597
    Likes Received:
    444
    Location:
    Yakima, WA
    I've been looking into doing something like this as well. The typical rod mounts aren't secure enough for freeway driving and I hate breaking rods down between trips. I'd be really interested to see what you come up with.
     
  6. chewydog

    chewydog Active Member

    Joined:
    Dec 6, 2008
    Messages:
    186
    Likes Received:
    68
    Location:
    Golden, Colorado

    Did you line the PVC with any type cloth? The one thing I can't seem to figure out.
     
  7. Travis Bille

    Travis Bille Active Member

    Joined:
    Oct 12, 2010
    Messages:
    774
    Likes Received:
    464
    Location:
    McKinleyville, CA
  8. Travis Bille

    Travis Bille Active Member

    Joined:
    Oct 12, 2010
    Messages:
    774
    Likes Received:
    464
    Location:
    McKinleyville, CA

    I didn't line the PVC with cloth. I wanted to, but couldn't figure out a way to do it.

    So far, no damage or scuffing to my rods. This thing is tacky and ugly, but damn is it functional.
     
  9. Eric Denny

    Eric Denny Summer is over but I'm still fishing!!

    Joined:
    Apr 11, 2013
    Messages:
    738
    Likes Received:
    119
    Location:
    Spokane, WA.
    I came across one like the picks but no tool box and he used a bigger PVC and had foam in it. he just used a bungie cord. I like the tool box better but maybe that will give you a idea on how to get something in it to help protect the rods. And I don't know how deep the foam was I could just see it when he was loading his rods after he had fished the spot I was stoping to check out. I remembered it because I thought it was a awesome idea. But Travis had the right idea with the tool box. He also used bungie cords to tie it down to the roof rack.

    Travis love the paint job. And the tool box idea hope the foam gave you some help. I don't know if your PVC pipe is big enough but it might give you a idea.
     
    Travis Bille likes this.
  10. Roper

    Roper Idiot Savant

    Joined:
    Apr 12, 2004
    Messages:
    4,727
    Likes Received:
    1,513
    Location:
    Glenraven Ranch
    Is the object here to travel with a fully rigged fly rod?
     
  11. freestoneangler

    freestoneangler Not to be confused with Freestone

    Joined:
    Jan 1, 2006
    Messages:
    5,891
    Likes Received:
    1,522
    Location:
    Edgewood, WA
  12. IveofIone

    IveofIone Active Member

    Joined:
    Sep 23, 2003
    Messages:
    3,464
    Likes Received:
    1,701
    Location:
    .
    IMG_0863.JPG IMG_0864.JPG IMG_0865.JPG Here is a simple design I use once I get to the water. I want no part of having a fully rigged rod on top of my rig at freeway speeds. But once I get there I string the rod and drive up and down the stream without having to break it down again. This took about an hour to cobble together in my shop and it has been so successful that I think I'll build a Mark II model-for two rods of course. I haven't driven over 60mph with this setup but the rod was stable at that speed with no whipping around. Not sure I would want to try it much faster than that.

    I built the roof rack to replace the factory model that was metal and sloped on the sides. The hardwood replacement is flat instead of curved and a pontoon boat has a better chance of staying centered with the small stubs on the end. The rod rack can be removed by taking out 4 wood screws. My only cost was about $3.00 for the Velcro. Cheap thrills. Ive
     
  13. TD

    TD Active Member

    Joined:
    Sep 5, 2009
    Messages:
    1,219
    Likes Received:
    513
    Location:
    North End
    I just clamp mine in my snowboard rack. It holds about 4 or 5 rods, locks, and I already them.
     
  14. Andrew Shoemaker

    Andrew Shoemaker Active Member

    Joined:
    Nov 22, 2013
    Messages:
    208
    Likes Received:
    76
    Location:
    Olympia, WA
    With a snowboard rack though someone could just screw down the rod seat and snatch the reel. Plus, for me, Id like to figure out a way to attach to my factory subaru rack a fully enclosed carrier to keep dust and debris off my outfit and keep it from whipping around in the wind at highway speeds. The snowboard rack seems like a good option for jumping around from spot to spot for once you get to the water. I'm just one of those people who hates spending time setting my rod up once I get to the water
     
  15. Jason Rolfe

    Jason Rolfe Wanderer

    Joined:
    Sep 23, 2005
    Messages:
    1,194
    Likes Received:
    390
    Location:
    the beach
    uploadfromtaptalk1394680885908.jpg this is my rod carrier. It protects everything really well. :)

    Sent from my HTCONE using Tapatalk
     
    Bill Aubrey and Eric Denny like this.