Discussion in 'Stillwater' started by Roby, Mar 6, 2011.
What type of loops are you guy's using to connect sink tips to your existing fly line?
Welded loop to welded loop.
That's what i thought. Me and silverbullet tried it today and it just doesn't seem like it would hold. Is there any other ways that are just as good?
What do most fly lines have on the ends? Welded loops. What do most commercially prepared tips have on the end? Welded loops. Lots of other ways, but not as common. If you are having trouble with the welding part, there is a lot to be learned about how to get it done right. Could be worth the money to buy a set of what you need for the immediate fishable future. You could also use the double catch braided loops, inchworm them onto the line ends/tip ends, nail knot in place and you are set. You can also make your own loops by folding them over and whip finishing them, then top coating the thread wraps. Lots of ways to skin this cat, but loop to loop works and has found its way onto most conventional systems...just sayin'.
Ya it sure looks to be the most common i guess we will just have to try to learn how to do it.
Thanks for your help, Roby
Does anyone know if Pacific fly shop can make welded loops for you?
Welded loops are nice especially when they are done by the factory. But for a connection that needs to feed thru the guides frequently, they are to bulky and catch on the guides. Braided loops form a narrower loop to loop connection. They travel more smoothly thru the guides and are very durable when done correctly. The problem is that you need to do them yourself. To learn to do braided loops take a look at the current issue of "Fly Fishing Salt Waters". They have an article on making braided loops. Or go to Blanton’s site and read “Getting Looped”.
Cool thanks for the link.
thanks for the help guys. we were stumped with the welding lol. just tired of the perfection loop snagging on the guides.
They sell these little eyes that attach to the fly line like a Chinese Finger puzzle that I use. I got a 27 bazillion pack of them at the Orvis store. They work great.
To be honest, any knot will snag on guides. It will depend on the type of knot and the what you are trying to connect. the bulkier the stuff is, the more problamtic it is.
If it is perfection loop issues, coat and taper the knot with some UV Knotsense or some similar glue. Coat the knot with a small amount of glue and draw down some on the line itself, tapering the profile of the knot to allow a more smooth transition through the guides.
Thanks for all the help guys.
i'm gonna give it a practice run with shoe goo lol
I've not used shoo goo, but use it if you've got it. A little dab will do ya! Too much at first and you've got a mess. Not enough and you can add another light coating. Good luck.