Delta 6/7 turnover issues

Discussion in 'Spey Clave' started by James Waggoner, May 6, 2011.

  1. James Waggoner

    James Waggoner Active Member

    Joined:
    Jun 16, 2007
    Messages:
    797
    Likes Received:
    48
    Location:
    wa
    So who uses heavier tips to facilitate turnover of larger flies? After a whole day of fishing yesterday, I learned the 77grn tips that come with the 6/7 delta, really suck for medium flies. Anything larger than a #2 skunk or equivalent profile was a real exercise in futility! The other problem was when I did manage to get a larger fly out to a fish-able distance, the resistance on the fly caused the light tip to ride up really fast, so I never felt like I was really in the zone....the guys I was with joked about my "Floater" all day.

    Anyway, I think I've devised a solution, just want to hear what others suggest before I say what I think and hear all about how it will never work. By the way using Delta 6/7 W/ tips on a 7136 Z-Axis

    Thanks, James.
     
  2. stewart dee

    stewart dee Guest

    I cut mine back for heavy tips. I find that a delta is a good line for type III and floater with smaller flies, as stock.
     
  3. Greg Holt

    Greg Holt Active Member

    Joined:
    Feb 1, 2004
    Messages:
    215
    Likes Received:
    114
    Location:
    camano island, wa.
    James,
    Experts on this board say it takes grains to throw grains, or other versions of the same relationship between line weight, tip weight, and fly weight. On my 11'6 6/7 Forecast, I prefer the lighter end of the grain window (say 360), while my son throws 500 grains on the same rod. This allows him to "upgrade" to T-14
    (10 foot length) and throw flies you would consider heavier. I can't duplicate that with my 360 gr head and 75 gr tip (T-8), but I don't want to.

    If/when I need to throw large stuff, I jump up to a TR1266 (which throws like a 7 wt) with a 450 airflo skagit compact (blunt front end) and 10 feet of T-14, rather than the Rio flights I prefer in the lighter weights. If that is insufficient in terms of performance, I go up in rod weight, line weight, and tip weight. til I can turn over the chosen fly (which by this time is no longer a fly, but an animal).

    I also have had success with shorter stiffer leaders too in turning over the big stuff. Nothing new there.

    I don't know the grain range of your Z axis, but I wonder if it could handle a heavier line or at least heavier tips than you fished? If you've discovered a new way to bend the laws of physics, TESTIFY, BROTHER, your congregation awaits!
    Greg
     
  4. James Waggoner

    James Waggoner Active Member

    Joined:
    Jun 16, 2007
    Messages:
    797
    Likes Received:
    48
    Location:
    wa
    I too like light weight, that's why i'm trying to make the 6/7 work...may have to go up to a 7/8. I do have other set up that will do it, but I'm working on my Delta skills...I really like the longer head and have really bought into the delta will make you a better caster bit.
     
  5. Red Shed

    Red Shed "junkyard spey"

    Joined:
    Jan 5, 2006
    Messages:
    517
    Likes Received:
    6
    Location:
    Peck, ID
    Home Page:
    Maybe you're trying to haul a BIG load of beer with a Mini Cooper.
     
  6. James Waggoner

    James Waggoner Active Member

    Joined:
    Jun 16, 2007
    Messages:
    797
    Likes Received:
    48
    Location:
    wa
    No, I'm not a car keys kind of guy. Here are a couple of pictures of two willing participants today. The MOAL is hanging out of the one fish I'm holding.

    By the way, Thanks Poppy! thats a Delta line from your shop...welded with the awesome heat gun you sold me and looped to the Varivas running line that I got at the same time, to replace the hunk of rope they put on this line from the factory. Love the line, just needed to put my spin on it and make it mine.
     
  7. Panhandle

    Panhandle Active Member

    Joined:
    Mar 24, 2005
    Messages:
    4,140
    Likes Received:
    79
    Location:
    Selkirk Mountains, Idaho Panhandle
    Compact skagit :D
     
  8. James Waggoner

    James Waggoner Active Member

    Joined:
    Jun 16, 2007
    Messages:
    797
    Likes Received:
    48
    Location:
    wa
    Nothing against the compact Skagit or any skagit for that matter, I've decided to just not use them anymore.
    "My name is James, I've been Skagit free for almost two and a half years."
     
  9. Big Tuna

    Big Tuna Member

    Joined:
    Dec 28, 2004
    Messages:
    2,125
    Likes Received:
    154
    Location:
    Wenatchee, Washington
    If you want to throw heavy flies, the line will be a stretch. If you want to throw good sized flies that are light, tie marabou spiders on plastic tubes. You can make a good-sized fly w/ a nice profile, but little weight. I fish that line w/ the type 6 tip and it casts nicely. But I don't throw heavy junk with it. I also fish a little heavier line. I have an MKS 7/8 and an LS2 1307; I fish a 8/9 on the former and a 7/8 on the latter.
     
  10. stewart dee

    stewart dee Guest

    I have an 8/9 and a 9/10 chopped back and looped for heavy tips if you want to try them out?
     
  11. Leroy Laviolet

    Leroy Laviolet Aint no nookie like chinookie

    Joined:
    Apr 22, 2008
    Messages:
    994
    Likes Received:
    2
    Location:
    do'n it 4 the chinookie
    James, upline one size to a 7/8 for that rod, that will solve your problem- I upline in the winter with my deltas one size for the bigger flies, as said earlier, mass turns over mass-
     
  12. Greg Holt

    Greg Holt Active Member

    Joined:
    Feb 1, 2004
    Messages:
    215
    Likes Received:
    114
    Location:
    camano island, wa.
    What Stewart and Poppy say.
    I cut back a 6/7 airflow delta by about five feet years ago before skagits were popular. You end up with a total head length of around 49 feet, and a tip diameter in the range of sixty to 70 thousandths, just enough to turn over T-14. Longer than a skagit, more powerful than a delta, able to cast over tall buildings in a single haul? You'll have the strange desire to wear a cape when you fish it...

    Oh wait, isn't that what they attempted with the design of the Northwest Skagit and the SA product equal?

    Problem is, you're trying to make a small hammer do when a big one is the better tool for (YOUR) chosen task. Lots of others have gotten bogged down in this hole, you might as well too. I'll get myself a beer and watch this unfold.
    Peace.
     
  13. James Waggoner

    James Waggoner Active Member

    Joined:
    Jun 16, 2007
    Messages:
    797
    Likes Received:
    48
    Location:
    wa
    Thanks guys. Up sizing was my first thought, and cutting the head back was my second. The first choice, was not an option on short notice, and then there's the whole more money thing. The second option of cutting it back, just seemed ridiculous as I have a few lines already that are in the 40' range, but after looking at the taper and weight distribution I wondered, "Why not just use a heavier tip?" So I used a 129grn tip which was about 50grns heavier and worked very well. Of course my first concern was hinging at the loop to loop connection...it did...but was manageable with casting adjustments. I've also got a set of tips for my DDC that are 125grns, they all worked nicely. I'm thinking a set of rio 8wt 15' tips might be the dialed in solution. Anyway, the solution was more mass...nothing new really.
     
  14. TallFlyGuy

    TallFlyGuy Adipossessed!

    Joined:
    Jan 16, 2003
    Messages:
    874
    Likes Received:
    45
    Location:
    Vancouver, WA.
    You are such a Rebel!! LOL Don't you know... Not fishing a skagit with a two handed rod is like using a two handed rod with only one hand.
     
  15. Panhandle

    Panhandle Active Member

    Joined:
    Mar 24, 2005
    Messages:
    4,140
    Likes Received:
    79
    Location:
    Selkirk Mountains, Idaho Panhandle
    James, I respect your sobriety and support your abstinence from being strung out on short heads. My worry is that the stress of trying to be too clean will drive you back to the needle. Sobriety is all about balance.