First Salmon Fly. Needs improvement.

Discussion in 'Fly Tying' started by PatrickH, May 28, 2014.

  1. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa
    First attempt at a Salmon Fly size 10. I haven't used many of these materials before, but I tied a fly to get a idea of what I am working with. Any helpful tips would be appreciated before I try another one so I don't waste any more of my double hooks :p
    I feel comfortable with the body section even though I know it could be better, but the rest of it I don't. I also feel the deer hair I used sucks and probably too long..

    IMG_2762.jpg
     
  2. Cole L

    Cole L Fish Fiend

    Joined:
    Mar 7, 2013
    Messages:
    186
    Likes Received:
    80
    Location:
    Bellingham
    For that style of salmon flies, I usually will use calf tail or squirrel for the wing. Maybe a smaller head and usually use a single hook if you're not retaining.
     
    PatrickH likes this.
  3. Jmills81

    Jmills81 The Dude Abides

    Joined:
    Jan 3, 2007
    Messages:
    2,186
    Likes Received:
    446
    Location:
    Spokane, WA
    fish it, my guess is that they wont care and crush it. Nice work
     
    PatrickH and Blake Harmon like this.
  4. Pat Lat

    Pat Lat Mad Flyentist

    Joined:
    Oct 6, 2012
    Messages:
    1,776
    Likes Received:
    2,086
    Location:
    seattle-ish
    Are you planning on fishing these type of flies? If so, its probably fine, minus the double hook. If they are just for show, then just the opposite. :) Get a big salmon fly book and follow the instructions.
    Those things are annoyingly hard to get right. And I've never been good at drawing inside the lines. But if I were to start, I'm sure that Mark Mercer's inbox would be full of pm's with dumb questions from myself
     
  5. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa

    Mostly just for show. I usually like to use a single barbless hook when I fish. A double with this large of barb will for sure rip some lips to the point of no return. I tie mostly for the art of it, but I do like to get out once in a while and fish the flies I tie.
     
  6. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa

    Is the wing the green buck tail I used?
    I haven't learned all the names for all the fly parts yet :p
     
  7. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa
    I just tied this one as a test design yesterday. I just got double hooks for fun, but I might try this one in the lake for bass.
     

    Attached Files:

  8. Cole L

    Cole L Fish Fiend

    Joined:
    Mar 7, 2013
    Messages:
    186
    Likes Received:
    80
    Location:
    Bellingham
    Looks like bucktail to me. Calf tail is a little shorter and better for smaller flies IMO
     
  9. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa

    Cool thank you. Calf tail is just what I need. The buck tail I used is just too big, but I had to use it because that is all I had. I wasn't sure what options I had since these flies are totally new to me.
    I will order some calf tail.
    Is there better grades of calf tail or is it all just pretty much the same?
     
  10. Cole L

    Cole L Fish Fiend

    Joined:
    Mar 7, 2013
    Messages:
    186
    Likes Received:
    80
    Location:
    Bellingham
    I think it is mostly about the same. There's always going to be a little variation between individual packages though but that's how it goes with most natural materials it seems
     
  11. Mark Mercer

    Mark Mercer Member

    Joined:
    Dec 6, 2008
    Messages:
    1,370
    Likes Received:
    1,073
    Location:
    port orchard, wa
    HI Patrick, if you want to learn the classics check out some of these books, 'The Salmon Fly' by Kelson would be a good place to start.
    Most all artistic tiers start by tying the classics to learn the skills and techniques needed. Good luck.

    http://nwflytyer.wordpress.com/classic-books/
     
    Teenage Entomologist likes this.
  12. FT

    FT Active Member

    Joined:
    Mar 29, 2005
    Messages:
    1,371
    Likes Received:
    231
    Location:
    Burlington, WA
    The wing on this style of fly looks and seems to fish best if it is 1.5 times the length of the hook shank long. There is nothing wrong with using bucktail for the wing on this style fly, just tie it shorter. I'd avoid calf tail and use dyed Artic Fox for the wing. Calf tail is crinkly due to its curled tips and this style fly looks best with a wing made of hair that is more or less straight.

    The head is twice as long as it needs to be. Use less thread to tie in the wing, hackle, and jungle cock. Put a drop of a flexible cement such as Dave's Flexament or similar in the wing tie in spot, then tie in the wing. This will lock the wing in and keep it from moving or pulling out. And the best part, you can tie the wing in with no more than 6-8 thread wraps if you put the flexible cement drop on and then immediately tie in the wing over the wet cement.

    There really isn't any need or reason to tie hackle or jungle cock in with more than 3-5 wraps of thread on any fly. Keeping the number of thread wraps down makes for a much neater fly and it doesn't compromise the integrity of the fly if the thread is applied correctly with tight wraps. In other words, more thread is not better, less thread is.

    That said, your fly is not bad and with a few small adjustments as mentioned above will be very much improved.
     
  13. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa

    Thanks for the tips. I will post up another once I try again. I usually don't wrap that much, but I get distracted while tying a new style of fly that I haven't tied before and was focused on the placement and not the proper technique.
    Is there any way to slightly straighten the calf tail? The fox fur I got is a little too fluffy for the look I'm going for with these. I did use it under the wing, it's red.
     
  14. PatrickH

    PatrickH Active Member

    Joined:
    Aug 14, 2013
    Messages:
    344
    Likes Received:
    146
    Location:
    Snohomish County Wa

    Thank you. I will have a look at those books once i sit down to tie some more :)
     
  15. FT

    FT Active Member

    Joined:
    Mar 29, 2005
    Messages:
    1,371
    Likes Received:
    231
    Location:
    Burlington, WA
    Unfortunately, there really isn't any good way to straighten calf tail.

    The secret with fox tail or fox fur is to pull or comb out about half the underfur (the shorter, thinner hair closer to the hide) before tying it in.