Getting new (to me) pontoon ready for the water...

Discussion in 'Watercraft' started by willburrrr2003, Jan 31, 2011.

  1. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    I picked up my pontoon on Saturday, hoping to take it out on Sunday. I brought it home and put it all together, this is what I got...

    View attachment 38484

    View attachment 38485

    I examined the frame and even though the paint was faded and oxidized it was solid, despite a bit of surface ruse on the frame sections when I took it all apart. I examined the seams on the toon skins carefully once inflated, and found the stitching on the bottom seams to be questionable, some stitching missing in a couple small spots and worn threading in others.... The bladders hold air fine, and didn't leak at all. At this point I decided to hold off on putting it on the water Sunday, and to get it up to snuff first... I picked up some paint for the frame, heavy duty stuff that also kills/prevents rust, and have painted 2 of the frame pieces at work today, the other pieces will get done tomorrow. I decided to get replacement skins from Creek Company (maker of toon) and rather than the standard replacement skins opted to upgrade to these instead...

    View attachment 38486

    I placed my order today for the skins, as well as a clip on rod holder too.
    This should be a sweet ride when I am done with it :D , and I can't wait to test it out soon!!
     
  2. Stewart

    Stewart Skunk Happens

    Joined:
    Feb 11, 2006
    Messages:
    1,007
    Likes Received:
    90
    Location:
    Spokane
    I would suggest changing the covers in the cleanest place you can. Not that it happened to me, but I think a fairly small bit of grit trapped between the bladder and the cover "could" puncture the bladder.

    Enjoy the toon. That really adds a great dimension to your fishing.
     
  3. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    Thanks for the advice, I will change them on a clean surface so as not to get any unwanted items inside the skins.
     
  4. Chef

    Chef New Member

    Joined:
    Aug 29, 2010
    Messages:
    1,097
    Likes Received:
    0
    Location:
    Seattle, WA
    Will: A lot of motification happens on the water so be prepared. I would take it to a small lake near you and try it out. Martha is a great place to make any changes before hitting a bigger lake plus it is close to us. Also, you will find that you will change stuff here and there as well.
     
  5. Old Man

    Old Man Just an Old Man

    Joined:
    Jan 1, 2002
    Messages:
    26,960
    Likes Received:
    5,525
    Location:
    Dillon, Mt
    Well now that you up graded the pontoons and fixed all that was wrong you could of went out and got a new 'toon. Or waited until spring when all the old stuff goes on sale. Just saying........................
     
  6. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    True Oldman, it was supposed to be solid and usable and for $130 didn't seem bad deal to get into one, but once I found the rotting missing stitches on the bottom of the toons I didn't want to risk using them. So I bought the upgrade heavy duty pvc skins, instead of just getting the normal replacement skins. And since I had new skins coming, I decided to paint it as well. I am into the whole thing just under $300. Comparable toons with the heavy duty pvc skins run for about $400 plus tax. Even though I have spent more than I planned, I am still not looking to terrible in the investment end of things. Plus I have been enjoying the project ;)
     
  7. Chef

    Chef New Member

    Joined:
    Aug 29, 2010
    Messages:
    1,097
    Likes Received:
    0
    Location:
    Seattle, WA
    Old man, maybe you forgot what it was like to first get into fly fishing. Will is doing a great job. Have fun with it Will.
     
  8. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    I am Chef :D
     
  9. Old Man

    Old Man Just an Old Man

    Joined:
    Jan 1, 2002
    Messages:
    26,960
    Likes Received:
    5,525
    Location:
    Dillon, Mt
    I'm not knocking him. I was just pointing out the facts. My first pontoon was a South fork. This was before they had the good pontoons. I sold it to a guy from the OP. My second was a Alpine made by Bucks Bags. It was used just for lakes. Paid about $450.00 for it from Teds In Lynnwood.. I also had a few float tubes which I also got rid of. I fish mostly skinny water now and I fish from the banks. Not to many lakes where I live now. Lots of big reservoirs that are too big for either one.
     
  10. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    No worries Oldman, I know what you are saying :) and pointing out... But I am still enjoying my project and anticipating using the finished toon soon :D here is a kind of ok pic of the painted pieces from last night...

    View attachment 38512
     
  11. longstick

    longstick Member

    Joined:
    Mar 7, 2006
    Messages:
    299
    Likes Received:
    1
    Location:
    North West
    Good call on the replacement skins. My dad went cheap one year and bought a boat like yours and I went with the more expensive 10 ft one like you ordered. We ran alot of large and small streams, one time down a small stream his nylon cover ripped open and the bladder came out. We were 10 miles from a truck and we were hosed. So I took 15 lb tippet and a barbless hook and stiched up the nylon. It took 4 hrs, but it worked. He sold the boat after buying new toons and upgraded. My boats is still rocken
     
  12. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    Exactly what I didn't want to chance happening ;)
     
  13. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    Painted up 3 more pieces on my frame yesterday, starting to look good :D
    I should get my new skins best case Friday worst case Mon or Mue.

    View attachment 38553
     
  14. Josh Smestad

    Josh Smestad aka Mtnwkr

    Joined:
    Jul 11, 2007
    Messages:
    646
    Likes Received:
    94
    Location:
    Port Orchard, Wa
    Looks good ;) Did you stick with 8' tubes or go up to 9-10'?
     
  15. willburrrr2003

    willburrrr2003 Member

    Joined:
    Oct 4, 2010
    Messages:
    265
    Likes Received:
    1
    Location:
    everett, WA.
    I kept with the 8' toons, as just the outside skins were questionable not the bladders. The bladders in them still appear to be solid and hold air. When I get the PVC skins, I will just remove the bladders from the original skins and put them into the new skins.