Is there such a thing as a good sub $250 reel?

Discussion in 'Fly Fishing Forum' started by IveofIone, Feb 25, 2013.

  1. IveofIone

    IveofIone Active Member

    Joined:
    Sep 23, 2003
    Messages:
    3,381
    Likes Received:
    1,597
    Location:
    .
    As a purveyor of cheap reels I have never felt the need to own an expensive reel. I started out with a Pfluger back in the day and then in the 70's moved up to the SA Series 1 reels. I was buying them for around $40 and spools for around $15 as I recall. I had both the 4-5-6- and the 7-8-9 and caught many steelhead up to 17# on the bigger reel. They did just fine and I went to Alaska and caught silvers and pinks on them until my arms drooped, I never had a failure.

    Then when I started stillwater fishing I converted over to a casette system to more easily accomodate a multitude of lines. For over a decade now I have been using the old Orvis Rocky Mountain reels and have about a dozen casettes for them loaded with a variety of lines. They have long been discontinued and casettes are no longer available. They also have an annoying problem of the drag setting slipping or being bumped out of place but as a long time tool and die maker it was an easy problem to remedy. The drags have been really good so far as they are similar to what is in some of the better Orvis reels.

    But last night I was watching a program with Brian Chan catching some nice rainbows in BC on chironomids and using a beautiful reel that made real music when the fish ran. I don't know what kind of reel he was using, I'm sure it was very expensive. I want something similar. I'll budget up to $300 for a reel and spare spool. It won't be as nice as Brian's reel but it should be much nicer than my $75 Orvis Rocky Mountain. What should I be looking at?

    Ive
     
  2. rainbow

    rainbow My name is Mark Oberg

    Joined:
    Sep 30, 2002
    Messages:
    1,374
    Likes Received:
    105
    Location:
    Renton wa
    Home Page:
    I still use and love evolutions for 6wt and under and lamson velosity's for salmon etc. Find them used, they have a life time warranty's and stand behind them.
     
  3. Kcahill

    Kcahill Active Member

    Joined:
    Feb 1, 2011
    Messages:
    909
    Likes Received:
    275
    Location:
    Renton, WA
    Why not just grab an old made in England Sage or Orvis reel? I use them on anything smaller than a 6 wt, you can pick them up for 100-250 and they never go down in value as long as you dont beat them up.
     
  4. zen leecher aka bill w

    zen leecher aka bill w born to work, forced to fish

    Joined:
    May 6, 2008
    Messages:
    3,772
    Likes Received:
    1,350
    Location:
    Moses Lake, WA
    Redington's, Scientific Angler 2L series, Lamsons... I use all of them.
     
  5. Richard Olmstead

    Richard Olmstead BigDog

    Joined:
    Jun 28, 2005
    Messages:
    2,819
    Likes Received:
    1,313
    Location:
    Seattle, WA
    Ive, I think you've found a solution in search of a problem! :)
    Dick
     
    Kent Lufkin likes this.
  6. PT

    PT Physhicist

    Joined:
    Jan 11, 2003
    Messages:
    3,845
    Likes Received:
    1,002
    Location:
    Edmonds, WA
  7. Stewart

    Stewart Skunk Happens

    Joined:
    Feb 11, 2006
    Messages:
    974
    Likes Received:
    65
    Location:
    Spokane
    I've got 10+ years on an Orvis Battenkill Barstock III. It was the first "expensive" piece of fly gear I bought. Price-wise it's not terribly spendy and it's still going strong. Other than a chipped up finish, it's as solid as the day I got it.
     
    Steve Call likes this.
  8. Matthew LeBret

    Matthew LeBret Active Member

    Joined:
    Oct 18, 2010
    Messages:
    835
    Likes Received:
    134
    Location:
    clarkston, wa
    English made orvis or sage will be built like a tank and well with in your range
     
  9. Drifter

    Drifter Active Member

    Joined:
    Mar 15, 2011
    Messages:
    1,807
    Likes Received:
    848
    Interesting! I just happen to have a 7-8 SA reel with two extra spools for my 5 and 6 wts. the one I have only weighs around 5 ounces. when I have to go to my "other" lines, and just gave my SA 1 reel to my daughter for her 3 wt.

    My cheap reels that I use are venture 7's (I have two) at 6 ounces they are not bad for my long lake 6 wts. and have a nice drag sound to them and when Guide slapped they will spin forever and pick up more line than any other reel I have found. putting on extra backing for 6 wt. lines makes the 7 more of a mid arbor. at $52 with a teeny two hundred sinking line for one and $70 for the other I surely wont complain.

    I have the Orvis Access 111 reel (very light) which I bought when Orvis did there "buy a reel, get a line for free" last year so it cost me around $80.

    My expensive reel is a nautilus fwx for 5 n 6 wt lines I bought right in the classifieds from this site for $150 and it came with a expert distance line making the reel cost around $100, I figure $50 for the used line!

    As far as new reels that new hardy DD light is one great looking reel. the problem for me is it has the screw on spool not a quick release but it is a super large arbor and just beautiful and "LIGHT"

    The Orvis hydros has a great finish that is almost blinding (if your into bling) If I am going to spend around $300 that reel is going to look like $300 and sing a beautiful "load" tune.

    But of course most will say the ROSS reels are the shit - just to damn ugly for me.

    When you drop below $200 it seems the large arbors get heavy so I think you are on the right track!

    If I had the budget I would have expensive reels I grew up fishing steelhead with little or no drag in the 70's and 80's. And am forced to be a cheap sob.

    If you want sound "loud music" the HARDY PERFECT! you couldn't get any better for MUSIC IMO! When playing fish I not only want to see and feel whats going on but hearing whats going on also has it's draw! My friend just bought the hardy DD lightweight and I can't wait to hear what it sounds like. good luck!
     
  10. Cedar

    Cedar Active Member

    Joined:
    Jul 23, 2009
    Messages:
    234
    Likes Received:
    51
    Location:
    South King
    I love my Orvis CFO for a small arbor and Access for a mid arbor. Tough to be the customer support. I really like my lamson guru too.
     
  11. KerryS

    KerryS Ignored Member

    Joined:
    Oct 19, 2001
    Messages:
    7,354
    Likes Received:
    2,673
    Location:
    Sedro Woolley, WA, USA.
  12. Old Man

    Old Man Just an Old Man

    Joined:
    Jan 1, 2002
    Messages:
    24,365
    Likes Received:
    3,292
    Location:
    Dillon, Mt
    I like cheap things. My fly reel on my 3wt cost me $29.95. I bought it five years ago and it is a Martin. I use it every summer. I give it a good grease job before use in the summer time and it does what I ask it to do. Hold my fly line.

    I bought two fly reels from Allen Fly Fishing at cost. Got one free. The free one works just as good as the ones you have to pay for. The most I ever paid for on a fly reel was 100 bucks. It is a Adventure 5. When I bought it , it was called an Adventure 5 and now they are called Venture. I guess they didn't like the Ad on the front
     
    Brookie_Hunter likes this.
  13. scottybs

    scottybs Active Member

    Joined:
    Oct 16, 2009
    Messages:
    519
    Likes Received:
    98
    Location:
    Bellingham, WA and IGH, MN
    Home Page:
    I'm a tightwad but I like quality! Buy reels on clearance.
     
    constructeur likes this.
  14. Salmo_g

    Salmo_g Active Member

    Joined:
    Nov 18, 2004
    Messages:
    8,634
    Likes Received:
    2,978
    Location:
    Your City ,State
    Ive,

    Ignore all the suggestions except from Kcahill and Matthew Lebret. First and foremost, if it's the reel song that you're after, forget disc drag reels. Think spring and pawl. Anybody recommending a disc drag reel for something as simple as trout fishing is unqualified to be making recommendations. Spring and pawl reels will play and land any fucking trout on the planet, and that goes for steelhead as well. Not to go off track, but the most desireable spring and pawl reels are discontinued, with the possible exception of Hardy lightweight series and Marquis.

    You can try fly shops, but you'll probably have to go on line. Look for old Orvis CFOs and Sage 500 series, both made by Hardy. I just picked up a Sage 504 and 505; they are perfect trout sized reels for line weights 3 - 6. Another discontinued sleeper is the Ross Colorado that was offered for only a few years. They were dirt cheap when closed out, and when I see them now they are about what the went for retail, $100 - $115. Use the heavier of the two check springs and tweak it to get the tension just right. Those Ross Colorados are better made than the Hardy lightweights, but they lack the classic snob appeal. Similarly, the Sage 500s were made by Hardy and are actually better quality than the comparable Hardy reels in terms of tolerance, milled bar stock instead of cast, and anodized instead of painted.

    I don't know what Brian Chan is using, but I'd be surprised if it weren't made by Hardy.

    Sg
     
    TwistedChimp likes this.
  15. Nathan B

    Nathan B Love em and Leave em

    Joined:
    Nov 16, 2012
    Messages:
    206
    Likes Received:
    175
    Location:
    Issaquah
    I agree with Salmo_g in regards to the spring and pawl. There are two reasons you should use this type of reel/drag. 1) To prevent over spooling 2) To let other fisherman know you have a fish on.

    Abel still makes one hell of a click and pawl reel they call the Creek Series. AC1 is designed for 2-3 wt rods while the AC2 (Abel Creek 2) is designed more for the 4-5 wt rods.