Oarlocks or Pins?

Discussion in 'Watercraft' started by Robert Engleheart, Apr 21, 2012.

  1. Robert Engleheart

    Robert Engleheart Robert

    Joined:
    Mar 28, 2008
    Messages:
    1,246
    Likes Received:
    201
    Location:
    Lemoore, CA
    Decided on a set of Rocky Mountain Raft tubes, 14' x 22". Found a deal on some 9' Cataraft oars. Since I have to upgrade my oarlocks to accept the larger diameter oar, got me to thinking about pins. Anybody have any thoughts? Pros & cons?
     
  2. Wayne Kohan

    Wayne Kohan fish-ician

    Joined:
    Oct 25, 2004
    Messages:
    1,169
    Likes Received:
    244
    Location:
    TriCities, WA
    I had pins and clips on the raft I recently sold. The biggest drawback is it is much more difficult to ship the oars, or pull them in and lay them across the boat to get them out of the water when you pull up to shore or moving down a lazy flowing section. I've had them bump off in a rocky section and they are pretty easy to reset on the pin when that happens, but it takes more effort, sometimes two hands to jam them back in. They feel real secure when cranking on the oars. If I get another raft though, I will get the oarlocks and oarrights.

    Wayne
     
  3. shawn k

    shawn k Member

    Joined:
    May 24, 2005
    Messages:
    697
    Likes Received:
    18
    Location:
    buckets worldwide
    Oar locks all the way. With pins you cant scull. Which is something you need to do when fishing.

    Where did you buy your cat tubes from?
     
  4. Ed Call

    Ed Call Mumbling Moderator Staff Member

    Joined:
    Jun 9, 2008
    Messages:
    17,842
    Likes Received:
    2,146
    Location:
    Kitsap Peninsula
    Never used pins so I can't compare. I do like oarlocks, oar rights and tethers.
     
  5. Evan Salmon

    Evan Salmon Active Member

    Joined:
    Jun 10, 2008
    Messages:
    334
    Likes Received:
    115
    Location:
    Onalaska, WA
    Oarlocks all the way... with oar rights. I don't actually use the oar rights for rowing, I place them high up on the wraps and use them to align the blade when my hands are off the oar. That way when I grab for them I know the blades are right and I don't have fumble around to align them. The extra second or two it gives me in getting a good power stroke in has saved a lot of gelcoat.
     
    Mike (Doc) LaCombe likes this.
  6. shawn k

    shawn k Member

    Joined:
    May 24, 2005
    Messages:
    697
    Likes Received:
    18
    Location:
    buckets worldwide
  7. Ray

    Ray Active Member

    Joined:
    Nov 26, 2007
    Messages:
    362
    Likes Received:
    38
    Location:
    Post Falls, ID
    Pins and clips suck. Oar locks are the way to go. Oar rights are like training wheels and won't let you feather your blades.
     
  8. ten80

    ten80 Active Member

    Joined:
    Sep 20, 2009
    Messages:
    489
    Likes Received:
    84
    Location:
    Anchorage, AK
    I have rope-wrapped oars (easy to do yourself) with brass oarlocks and the setup is much easier to row than with oars with pins & clips. Less clanking, smoother strokes, and easier to ship oars. I have a big boat and oar rights take a lot of stress off the arms when rowing in strong currents. Have yet to find a need for oar feathering (am I missing out on something revolutionary?). Oar rights keep the oar the blades straight when I let the oars hang when anchored. This helps keep the boat track straight rather than wander about.
     
  9. Robert Engleheart

    Robert Engleheart Robert

    Joined:
    Mar 28, 2008
    Messages:
    1,246
    Likes Received:
    201
    Location:
    Lemoore, CA
    Thanks to all the good information. I'm going to go with oarlocks and the short oar stops Evan mentioned look like the ticket.