realistic flys

Discussion in 'Fly Tying' started by flytyerboy95, Mar 22, 2007.

  1. flytyerboy95

    flytyerboy95 Future fly fishing guide

    Joined:
    Mar 22, 2007
    Messages:
    300
    Likes Received:
    1
    Location:
    Monroe,WA
    :confused: i want to get into tying realistic flys dont have the right matrial:mad: and need some advice. oh yeh and i only been tying for three weaks and have tied 35 flys:)
     
  2. flytyerboy95

    flytyerboy95 Future fly fishing guide

    Joined:
    Mar 22, 2007
    Messages:
    300
    Likes Received:
    1
    Location:
    Monroe,WA
    isnt any body going to reply i waiting
     
  3. ibn

    ibn Moderator

    Joined:
    May 21, 2002
    Messages:
    1,848
    Likes Received:
    18
    Location:
    Federal Way
    Home Page:
    Well, what's your question? Why not go buy some materials and just give it a try?
     
  4. Charlie S

    Charlie S Confrimed Reprobate

    Joined:
    Oct 9, 2006
    Messages:
    275
    Likes Received:
    1
    Location:
    Ukiah, CA but moving to Spokane
    You have been tying for three weeks and a total of 35 flies and you want to get into realistic flies? OK, be prepared to spend at least 6 hours, and more likely at total of 24 to 72 hours, per fly. That's no joke. I had the opportunity to sit and just watch (after giving a promise not to identify him, his methods, and most importantly, I wasn't allowed to ask any questions or otherwise interrupt him) one of the best realistic tiers I have ever seen. He spent a total of 8 hours just making the wings on an adult damsel fly imitation! The finished product looked like it could fly away. The materials can be obtained from many common household items. I would do a search on the internet about realistic flies to see what you will be attempting.

    For a more practical matter I would consider getting into a local fly fishing club or getting to know someone at at local fly shop to try to gain some lessons. I've been tying for about 55 years not and I enjoy teaching others some of the tricks that I have learned....I'm sure you can find someone like me in your neighborhood. The old reprobates don't know it all, regardless of what we claim but we know enough to help, I'm sure.

    Tying involved practice, repetition and attention to detail. Repeatedly....like tie at least two dozen of one pattern and get to the point where they all look exactly the same. Then you might be ready to venture into bigger and better things. By the way, some of the neatness tricks I have learned while tying at various shows were from youngsters who had no idea they were doing something in a manner none of the old codgers would have ever tried, and with great success! Good luck.
     
  5. flytyerboy95

    flytyerboy95 Future fly fishing guide

    Joined:
    Mar 22, 2007
    Messages:
    300
    Likes Received:
    1
    Location:
    Monroe,WA
    thanks a lot for the advice guys. i guess i shoudnt just go off on a tying rampage
     
  6. TheShadKing

    TheShadKing Will Fish For Food

    Joined:
    Sep 29, 2004
    Messages:
    257
    Likes Received:
    4
    Location:
    Bellevue, WA
    Actually, there's a realistic spider that's very easy to tie.

    [​IMG]

    This isn't a good write up, but it's what I have kicking about.

    It's loosely based on a spider that I think was in Fly Tier, but I can't actually remember ... the recipe I worked from originally had a hollow deer hair body and I found it difficult to size and shape correctly.

    The pattern I do is much easier ... just take a cylinder / rod of foam, and melt one end to give a nice spider butt shape to it. It takes a tiny bit of practice but is pretty easy ... use a candle for heat. The shaped end off to the length of the finished spider, i.e., including a length for the spider thorax. Use a razor blade and cut a slice for the hook to slide into.

    Start your thread on the hook. Using the slice, mount the spider body on the hook. Wrap the thorax part of the spider body down to the size of the thorax you want ... you'll find that by controlling thread pressure you can shape the thorax any way you want.

    You don't need to do any shaping on the spider butt ... because it's foam it'll give a real nice shape.

    Then you want to attach spider legs ... use four pieces of mono ... 6 pounds is a good starting weight ... that'll give you eight legs. Cut them longer than you want the finished legs ... it keeps you from having to position the strands left / right as you tie them. You may find it easiest to put the legs on either two or four at a time, and then use the thread to even out exactly where the legs are.

    After you do a couple of bodies, you'll find it only takes a few minutes to do the above work.

    Next, gently heat a bodkin in the candle and put a sharp upward bend in each leg right at the spider body. Careful here ... it's easy to melt the legs off if you use either too much heat or pressure. Then put two less abrupt downward bends, and cut the legs to length.

    Color the spider body with whatever permanent marker floats your boat ... sharpies work well to color the legs.


    It's a fast fun tie!
     
  7. Charlie S

    Charlie S Confrimed Reprobate

    Joined:
    Oct 9, 2006
    Messages:
    275
    Likes Received:
    1
    Location:
    Ukiah, CA but moving to Spokane
    COOL!!!!! Like I said, always learning!!! Thanks for sharing.
     
  8. flytyerboy95

    flytyerboy95 Future fly fishing guide

    Joined:
    Mar 22, 2007
    Messages:
    300
    Likes Received:
    1
    Location:
    Monroe,WA
    that sounds awsome i will try that you dont see very many spider patterns that offten.if any of you guys have herd of oliver edwards he does a amazing paraleptophlebia nymph and a lot of other great realistsic nypmh patterns
     
  9. seanengman

    seanengman Trout have no politics

    Joined:
    Jun 13, 2006
    Messages:
    966
    Likes Received:
    3
    Location:
    davenport, wa
    those spiders are giving me the jeebies!
     
  10. btfriar

    btfriar New Member

    Joined:
    Jun 4, 2006
    Messages:
    2
    Likes Received:
    0
    Location:
    edmonds
  11. g_smolt

    g_smolt Recreational User

    Joined:
    Dec 16, 2005
    Messages:
    1,009
    Likes Received:
    305
    Location:
    58°19'59 N, 134°29'49 W
  12. Mark,
    That was some seriously realistic shit. Unbelievable! I think I might have a nightmare or two. I know this one guys got 35 tiwd in three weeks I have more like 35 in 6 months, and to get to the level of those pictured, maybe when I'm 80++.
    How's the fishing up there been?
    Frank.
     
  13. cabezon

    cabezon Sculpin Enterprises

    Joined:
    Nov 14, 2004
    Messages:
    2,149
    Likes Received:
    862
    Location:
    Olympia, WA
    Tying flies as art is certainly cool, but tying flies that catch fish is cooler, IMHO. One person who is acknowledged as a major creative driver of realistic, but fishable flies, is Oliver Edwards. He is the author of an amazing book that can guide you through the tying steps, Fly Tiers Masterclass. He has also written articles for FlyTier magazine and I believe that there may be a DVD or two out too. Here is URL of a stonefly that tied by someone else that is based in Edward's ideas: www.flytyingworld.com/PagesL/ldc-oliveredwardsstone.htm

    Personally, if I were just starting out tying, I would spend more attention in covering the basic ten or so patterns: wooly bugger, muddler minnow, pheasant tail nymph, hare's ear nymph, chironomid, copper john, zug bug, Adams, Elkhair caddis, stimulator, hopper, CDC emerger. [Your list may vary.] Fortunately, there are still lots of dumb trout out there that fall for these classics.

    Another tying book (and author) that I highly recommend is Mayflies: From Top to Bottom by Shane Stalcup. While the flies aren't as realistic, they capture the essence of each bug.

    The adventure begins,

    Steve
     
  14. flytyerboy95

    flytyerboy95 Future fly fishing guide

    Joined:
    Mar 22, 2007
    Messages:
    300
    Likes Received:
    1
    Location:
    Monroe,WA
    i agree with the catching fish thing but some fish catching realistic flys are good those web sites kick butt those are some realistic flys showed some to my friend and he said "wow were does that kind of bug live" and he didnt believe that it wasnt reall. wish i had the skills to tye thoughs kind of flys though that caddis pupa on robs realistic looks fairly easy just have to get thoughs matierel. oh and cabezon i tied all the flies on youre list exept for the copper john,adams,stimulator,and cdc emerger thanks for all the info guys!
     
  15. Karjala

    Karjala New Member

    Joined:
    Aug 3, 2005
    Messages:
    9
    Likes Received:
    0
    Location:
    FINLAND
    Hi, Charlie S i hope this one help you????