SA Uniform Sink--Something Better?

Discussion in 'Stillwater' started by LCnSac, Apr 10, 2014.

  1. LCnSac

    LCnSac John or "LC"

    Joined:
    Aug 29, 2011
    Messages:
    1,068
    Likes Received:
    302
    Location:
    Sacramento, CA
    Home Page:
    Tonight I was stringing up for bass tomorrow, and noticed about a quarter inch of "coating" missing on my SA Type IV line. I don't know if wrapping it in the Minn Kota last year had anything to do with that;-)

    So, I need a new line, unless I can repair this one which is probably a no? I've ALWAYS bought SA Uniform Sink for lake fishing, but wonder if there's anything better for a 6 wt. line?

    My favorite lines are Rio Outbound Short I use for Stripers, and they claim those are "density compensated." I'm not sure if that's the same thing, and of course a uniform sink rate is critical for many freshwater species.

    You say?
     
  2. Tim Lockhart

    Tim Lockhart Active Member

    Joined:
    Mar 28, 2006
    Messages:
    2,171
    Likes Received:
    770
    Location:
    Mill Creek, WA
    Depends on who you ask. I tried the rio (the front heavy one) and couldn't stand it. Immediately went back to the SA, it casts and it works. You'll hear some differing opinions though. For me the rio was clunky.
     
    Lue Taylor likes this.
  3. Lue Taylor

    Lue Taylor Lue Taylor/dbfly

    Joined:
    Jun 17, 2010
    Messages:
    710
    Likes Received:
    294
    Location:
    auburn,wa
    Stay with SA
     
  4. Irafly

    Irafly Indi "Ira" Jones

    Joined:
    Mar 14, 2003
    Messages:
    5,269
    Likes Received:
    2,928
    Location:
    Everett, Washington, USA.
    1/4 of an inch? How does overall affect the line? Not ragging, just curious. Does it affect the casting, the sink rate, the hook set?
     
  5. Donato

    Donato Member

    Joined:
    Apr 16, 2009
    Messages:
    188
    Likes Received:
    17
    Location:
    Bothell WA
    Where can I buy some at a deal? My type four is over 10 yr old and the coating starting to crack in places. I'd like to replace it. I need 6wt type IV full sink.
     
  6. PeteM

    PeteM Member

    Joined:
    Nov 21, 2001
    Messages:
    631
    Likes Received:
    8
    Location:
    Snohomish, WA, US.
    Similar to Fenders, I tried the RIO as well and didn't like it as much. The SA line has been great for me.

    Pete
     
  7. LCnSac

    LCnSac John or "LC"

    Joined:
    Aug 29, 2011
    Messages:
    1,068
    Likes Received:
    302
    Location:
    Sacramento, CA
    Home Page:
    I don't see any affect, however I do see material that looks like fabric showing through. Maybe some superglue?
     
    Irafly likes this.
  8. Jeff Dodd

    Jeff Dodd Active Member

    Joined:
    Dec 4, 2004
    Messages:
    1,895
    Likes Received:
    660
    Location:
    Langley, WA
    I somehow cut my line in 2 pieces. I used braided mono and aquaseal to create a junction. I have not put it to the test and I prefer if that section of line is on the reel when big fish hit. Haha. This may work for you also but it is ugly and you will still want to replace the line.

    Nice boat! I like the layout. Do stripping baskets fit onto your down rigger mounts for days when you leave the gear rod behind?
     
  9. LCnSac

    LCnSac John or "LC"

    Joined:
    Aug 29, 2011
    Messages:
    1,068
    Likes Received:
    302
    Location:
    Sacramento, CA
    Home Page:
    Thanks, Jeff! Since that picture I have stripped out all the hardware equipment and accessories as I rarely use gear. My stripping buckets are made from collapsable laundry bags from Walmart with a wood bottom with doweling. Not as pretty as the Sea Level but cost less than one tenth as much and perfectly functional.
     
    Jeff Dodd likes this.
  10. Denny

    Denny Active Member

    Joined:
    Oct 5, 2001
    Messages:
    4,278
    Likes Received:
    94
    Location:
    Seattle, WA, USA.
    I repaired a saltwater line using braided mono. It did pretty well until I was pulling REALLY hard on a saltwater fish, in Mexico, with my 11 weight and KA-POW!!!, a sound like a Black Cat firecracker went off and my line broke at the the braided mono connection. So, the connection does work for the most part, but it does have its limitations...
     
  11. Stonefish

    Stonefish Triploid, Humpy & Seaplane Hater

    Joined:
    Feb 26, 2003
    Messages:
    4,184
    Likes Received:
    1,974
    Location:
    Pipers Creek
    You are really comparing two different types of lines in regards to the SA uniform sink and a Rio Outbound Short.
    Those that don't like the Outbound are likely used to making multiple false casts. One false cast, aim high and let it fly with the Outbound.
    SF
     
    troutpocket likes this.
  12. LCnSac

    LCnSac John or "LC"

    Joined:
    Aug 29, 2011
    Messages:
    1,068
    Likes Received:
    302
    Location:
    Sacramento, CA
    Home Page:
    I ended up using heat shrink tubing for the fix. I use the pool to check flies and lines, and I don't think there's any ill effect with the fix, as least nothing visual. We'll see how long it holds.
     
  13. kamishak steve

    kamishak steve Active Member

    Joined:
    Oct 9, 2006
    Messages:
    369
    Likes Received:
    97
    Location:
    Seattle, Wa
    i personally like the rio density compensated lines. I've had the same Deep 6 for like 10 years, used it in salt& fresh, i can't tell you how many different species i've caught using it, lakers, lings, rock fish, salmon, all sorts of weird tropical stuff in nicaragua, smallies, walleye, & the biggest rainbow of my life. I dont' find it to be clunky to cast with, you just can't be impatient with it, especially with lighter rods. I actually think it fishes best of a fairly medium action 6 wt, just take your time, let the rod flex well down into the butt, and watch out while that line catapults off.
     
  14. GAT

    GAT Dumbfounded

    Joined:
    Nov 16, 2012
    Messages:
    7,179
    Likes Received:
    5,250
    Location:
    Willamette Valley, OR
    The line is supposed to sink, right? Who cares if the fabric is showing through. If a quarter inch is the only problem, I'd use AquaSeal to coat the effected area and call it good. AquaSeal is more flexible than your typical superglue.

    If you absolutely must buy a new full sinking line, I'd stick with the SA. But for a quarter inch problem, I'm too cheap to spend 70-80 bucks for a new line that is supposed to sink.
     
    bakerite and Jeff Dodd like this.
  15. troutpocket

    troutpocket Active Member

    Joined:
    May 18, 2004
    Messages:
    2,110
    Likes Received:
    877
    Location:
    Ellensburg, WA
    I think this is accurate. The new Rio In-Touch lines are much closer to a shooting head taper than a standard weight forward. I've been fishing an Outbound Hover line in lakes the past four years and have adapted to casting it (find the load point, pick it up once and shoot it out again). This spring I picked up the In-Touch camolux and find it casts very similar to an Outbound - which is good if you like to cast a shooting head and bad if you don't.