Salmon/Steelhead Rod advice

Discussion in 'Steelhead' started by Red, Sep 18, 2002.

  1. Red

    Red New Member

    Joined:
    Sep 17, 2002
    Messages:
    12
    Likes Received:
    0
    Location:
    Olympia, WA, USA.
    I know it's a flyfishing board but, I'm buying my first spinning rod for steelies and salmon and would like to have some input on brands, rod action, length, etc. Trying to stay under 100 dollars but will consider top of the line stuff if there's enough support out there to justify the added cost. Fishing the Oly peninsula mostly. Thanks in advance. :TONGUE

    Tight lines!
     
  2. hikepat

    hikepat Patrick

    Joined:
    Jan 17, 2004
    Messages:
    1,805
    Likes Received:
    14
    Location:
    Des Moines, WA, USA.
    Might try posting on the sales board confererance on this forum. Might be some guys out there wanting to sell off their old spin gear now that they fly fish. I would sell some of my old spin gear stuff myself but it makes good decoration and is good to lend to young kids I take out once in a while. My old bass lures are old enough to be collectable and make good wall art.
     
  3. Old Man

    Old Man Just an Old Man

    Joined:
    Jan 1, 2002
    Messages:
    24,398
    Likes Received:
    3,310
    Location:
    Dillon, Mt
    What do I know---I'm just an old man

    Go to Bob's Piscatorial Pursits Fishing forum and you will get all the help that you need. Just put what I said altogether with no caps and add a .com at the end. Oh don't forget the www. :THUMBSUP

    Just one of my many answers :HMMM

    Jim
     
  4. mtlhead

    mtlhead Member

    Joined:
    Feb 26, 2003
    Messages:
    384
    Likes Received:
    0
    Location:
    Concrete, WA, USA
    I would go to www.stcroixrods.com/index2.html and check these rods out.Take a look at the wild river series, they are a little over $100.00, but they are in my opinion the best for the money. Take a look at the dealer list and call one near you, that way you can go and see the rod, and even shake it if you want. At St. Croix, they have customer service and a warranty that is top notch, and you will not be disappointed. :THUMBSUP
     
  5. Greg

    Greg Member

    Joined:
    Dec 31, 1969
    Messages:
    316
    Likes Received:
    13
    Location:
    Gig Harbor, WA, U.S.A.
    mtlhead,

    To be fair, honest and above board, shouldn't you provide a disclaimer that you are a St. Croix dealer?

    Greg
     
  6. Peter Pancho

    Peter Pancho Active Member

    Joined:
    May 21, 2004
    Messages:
    1,750
    Likes Received:
    11
    Location:
    Gig Harbor,WA
    Home Page:
    For a spinning reel, buy Okuma's Epixor 10 ball bearing spinner. Model 30 I believe. THE best for the money at 40.00 on sale at Sportco in Fife,WA. You might want to go with the model 40 for more line capacity. The last steelhead I caught with my reel rocketed off all of its 150 yds and took off like a runaway spaceshuttel and jetted ALL of my line and snapped it like a 2lb tippet!
    For a rod, I went with "Custom Made" brand from Sportco. 45.00 with Fuji guides, 8'6". Can't beat that. Good luck.
     
  7. cuponoodle breakfast

    cuponoodle breakfast free bird

    Joined:
    Feb 26, 2003
    Messages:
    1,829
    Likes Received:
    492
    Location:
    western WA
    Buy and learn to use a baitcasting reel. It's not difficult and your line control is 10x better.
    For a rod, don't spend too much. $300 for a drift rod is highway robbery. My $80 Shimano Convergence has caught many fish and I doubt a more expensive rod would have got more. There are several good rods for under $150. 8'6" is the norm for drift fishing, 10'6" is common for floats. My next rod will be a 9'6" for double duty.
     
  8. Red

    Red New Member

    Joined:
    Sep 17, 2002
    Messages:
    12
    Likes Received:
    0
    Location:
    Olympia, WA, USA.
    Thanks for the advice everyone. Good info.

    Red

    :HAPPY
     
  9. Old Man

    Old Man Just an Old Man

    Joined:
    Jan 1, 2002
    Messages:
    24,398
    Likes Received:
    3,310
    Location:
    Dillon, Mt
    What do I know---I'm just an old man

    He's not a dealer. He just likes their products as I do. He builds a lot of spinning rods out of St Croix fly rod blanks.

    Jim
     
  10. mtlhead

    mtlhead Member

    Joined:
    Feb 26, 2003
    Messages:
    384
    Likes Received:
    0
    Location:
    Concrete, WA, USA
    Just to keep things out in the open I am a St. Croix Dealer, but I do not sell the factory assembled rods that I recomended. I am a Custom Builder and also a dealer for many other mfg.'s. St. Croix has shown me many times that customer service, before and after the sale is one of their top priorities. I only recomend products that I believe in, and if I no longer had a St. Croix Blank available to me I would still promote their products. If I was to try to profit from the post, that would not be right and I would say I'm sorry. Anyway I just believe they have got a total package worth sharing with others so they can find the same satisfaction that I have. :THUMBSUP
     
  11. Dann

    Dann New Member

    Joined:
    Feb 26, 2003
    Messages:
    62
    Likes Received:
    0
    Location:
    Calgary, Alberta still an ameriken though...L
    okay here is another question for this topic.....what type of line do you prefere or like....pound test wise.....thanx for the help all...... :BIGSMILE
     
  12. Dan Reynolds

    Dan Reynolds Member

    Joined:
    Jun 20, 2003
    Messages:
    376
    Likes Received:
    5
    Location:
    Bozeman, Mt
    I mostly flyfish but do wet a line with a spinner occasionally for salmon or steelhead. I picked up a Shakespear Ugly Stick 8'6" Steelhead/Salmon spinning rod model Model number: SP1186-2M and am very pleased with it. Works well with light spinners as well as heavy weight. I added a Shimano ?4000 ball bearing reel which works fine.

    (Note: it does not fish like a bait caster, the tip is floppy but you would never break this rod!) It has a long handle and is very light. A good all around med action spinning rod for salmon/steelhead. I got a screaming deal on it at the sports authority for $38 last year! I don't think they are available there anymore...you would need to search the web. (I bought it online and they did not carry that one in the stores).