Dude. A dish pan and bungy cord will do the trick. There was a really cool self made one some months back here on the forum. It was made from a footstool from IKEA. You might check the search if no one has one to sell.
I finally bit the bullet after fighting all the salad and barnacled rocks a couple of days ago. Ran up to Peninsula Outfitters and picked up a Linekurv basket.
just get a tupperware container(about 8 to 10" long by 12to 15" wide by 6 to 8 inches deep) and drill about 9 holes in the bottom. cut the plastic on the backside to acomodate a wading belt from your waders and you are all set for less than 5 bucks. Mine worked great on the last pink run!!
I use a $2.99 tupperware type container. I drilled holes in the bottom and inserted 8-10 1/2"- 1" of weed eater line (fingers/nubs) to reduce coiling in the bottom and for line seperation while stripping. I used silicone to seal up the holes and hold the line.
For the belt loops, I drilled out the slots( since cutting the plastic usually leads to splits and cracks) and inserted the belt at the correct angle for my stripping angle and stance. It took me 20 minutes... maybe 30.
A forum community dedicated to fishers, anglers and enthusiasts in the Washington area. Come join the discussion about safety, gear, boats, tackle, reviews, accessories, classifieds, and more!