Who makes this boat (fiberglass runabout)?

Discussion in 'Watercraft' started by Tracy Lauricella, Sep 22, 2012.

  1. Tracy Lauricella

    Tracy Lauricella Active Member

    Joined:
    Jun 1, 2009
    Messages:
    323
    Likes Received:
    34
    Location:
    Lakewood, WA
    My neighbor is giving me a boat. Now I know there's no such thing as a free boat; there's obviously going to be some expense in getting this one into the kind of shape I want it in. It seems sound though, and just neglected.

    It's a 16' fiberglass runabout, with a Mariner 60 outboard motor. I don't know who makes it. That's an issue, since the Vessel Title Application requires listing the boat manufacturer.

    The VIN plate has been painted over by someone, and while the VIN is still nice and clear I can't read the manufacturer's logo. I am hoping that someone here will recognize it and can provide some insight into who makes this boat:

    [​IMG]


    The boat itself looks to be in solid shape, but has been sitting for a long time. There's about 5" of standing water in front of the bench seat, but the rest appears dry. There's water stains about 8" deep there, so the recent warm weather probably is a factor.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Any idea who makes this?

    Thanks,
    --Tracy
     
  2. Robert Engleheart

    Robert Engleheart Robert

    Joined:
    Mar 28, 2008
    Messages:
    1,555
    Likes Received:
    424
    Location:
    Lemoore, CA
  3. Tracy Lauricella

    Tracy Lauricella Active Member

    Joined:
    Jun 1, 2009
    Messages:
    323
    Likes Received:
    34
    Location:
    Lakewood, WA
    Well, no sooner asked than answered. I think I found the logo.

    Look the same?

    [​IMG]
    [​IMG]

    Edited to add: Looks like we were both thinking the same thing!
     
  4. Robert Engleheart

    Robert Engleheart Robert

    Joined:
    Mar 28, 2008
    Messages:
    1,555
    Likes Received:
    424
    Location:
    Lemoore, CA
    There's a website for owners, early models most desired. Son-in-Law has a 69 I/O 21' cuddy cabin. Nice boat, shitty OMC outdrive.
     
  5. Robert Engleheart

    Robert Engleheart Robert

    Joined:
    Mar 28, 2008
    Messages:
    1,555
    Likes Received:
    424
    Location:
    Lemoore, CA
  6. yellowlab

    yellowlab Active Member

    Joined:
    Nov 15, 2005
    Messages:
    2,705
    Likes Received:
    132
    Location:
    Bellevue, WA
    Home Page:
    Looks like a lot of work ahead of you. B.O.A.T. = Bust Out Another Thousand...
     
    Robert Engleheart likes this.
  7. Tracy Lauricella

    Tracy Lauricella Active Member

    Joined:
    Jun 1, 2009
    Messages:
    323
    Likes Received:
    34
    Location:
    Lakewood, WA
    Thanks for the link! My next step is to try and figure out what year/model this is. I know it can't be manufactured after 1965, since there's a '65 permit in the window.

    [​IMG]

    Through some magic VIN decoding (which is apparently less of a security issue than I thought)
    I think this is a 1964 Glasspar Tacoma, built in the Olympa, WA plant.
     
  8. Bill Aubrey

    Bill Aubrey Active Member

    Joined:
    Mar 27, 2006
    Messages:
    1,129
    Likes Received:
    195
    Location:
    Tacoma, WA
    Tracy,

    Drain all the water out and then, let it drain in a raised position for at least a couple more weeks. Check daily to see if you are still losing water. Once she is good and dry, rap on the glass and decking with your hand to see if there are any squishy spots. A lot of times when water sits in a boat for a time, it can get below decks and you can develop rot. If you have it, you will need to go in and cut it out. Rot is like a cancer--it lives and grows. Nice boat, though. Have fun with your project.