SBS Yellow Wulff (Carnage variation)

ScottP

Active Member
#1


Tied here in single post style; change colors to suit your needs.


hook - Dai Riki 135 #10
thread - UTC 140 yellow
core - 8lb Mason
tail - moose body
body - 1mm foam yellow
wing - moose body
hackle - yellow (1TBS Rit golden yellow, 1 cup water)


put a loop in the mono




mash barb, tie mono at 1/2 mark




measure (2x hook length) some moose body; tie in/trim






measure (hook length+) another clump; tie in facing forward over eye, trim butts






hook the loop onto the gallows, wrap tail up the core and back






tie in foam (about 1/3 hook gap in width)




brush underbody with Super Glue, wrap foam up with touching wraps, increasing tension as you go




brush on some more Super Glue and wrap back to the tie-in with overlapping wraps; tie off/trim, trim mono




re-set hook angle, tie in hackle, take a few wraps in front of wing to set angle




wrap hackle, tie off/trim, half hitch x 2, SHHAN








trim underside if desired








Regards,
Scott
 

Latest posts