Rotten Floro Carbon??

Vladimir Steblina

Retired Forester...now fishing instead of working
#1
So I am connecting some florocarbon leader material to my fly line and the knot kept breaking.

Finally, I just stretched the leader material and it broke......just like rotten nylon leaders.

I thought florocarbon did NOT get rotten. At $15 a leader spool that's expensive.

So it looks like $75 of leader material into the garbage....better to find out today at the table than tomorrow on the lake!!

Anybody else had this problem??
 

GAT

Dumbfounded
#3
There's flouro and there's flouro. I see that some companies advertise "100% flourocarbon" which indicates to me that some products sold under the name of flourocarbon may be some manner of mix.

I know I've purchased some flouro from a specific company and it did easily break over time. I no longer buy that brand. Other brands do not have that problem so I now stick with them.
 

Vladimir Steblina

Retired Forester...now fishing instead of working
#4
Mine was labelled as 100% floro....RIO.

One batch was old....probably a decade. The other about 3 or 4 years.

Yes, I do not change flies very often.
 

freestoneangler

Not to be confused with Freestone
#7
Fish it Vladimir...makes for better sport ;). I find fluorocarbon too dam expensive and limit my use of it to really tough spring creek waters. I really haven't found it to make that much difference in success rate IMO.
 

Vladimir Steblina

Retired Forester...now fishing instead of working
#9
Fish it Vladimir...makes for better sport ;). I find fluorocarbon too dam expensive and limit my use of it to really tough spring creek waters. I really haven't found it to make that much difference in success rate IMO.
For sport nothing beats fishing a fly with the hook point broken off.

The reason I switched was that I was replacing leaders for four reels or more every year and then buying a new set of mono tippets since they rotted so quickly. If you look at the lifespan I am not sure if mono is any cheaper than flurocarbon. I had that set of fluoro for four years. In that span, of time I would probably have bought three sets of mono tippets.

It would nice if somebody came up with a simple tool that would measure breaking point of fishing line.

Just came back from the store with $75 of tippet material. I asked the owner about lifespan of fluro. His fishing expert pointed out that fluro is made of petroleum products and will eventually break down.
 

freestoneangler

Not to be confused with Freestone
#10
Still, good quality mono (I like RIO Powerflex) is about 3x less than fluorocarbon and I always feel better knowing I have reasonably fresh stuff... painful throwing $15 spools of fc in the trash. I still have a good friend who is a well known guide in Stevensville who fishes Maxima mono...swears by it.
 
#11
Chemically, floro is really, really stable. It does not degrade, like mono, in sunlight (UV) or it does so slowly.

I have had some old floro that is just fine. However, I have had some new stuff that had bad spots - more than once. I have taken to stripping off 3-5 yds. when I get into a situation like you described. It typically has solved the problem and saved a lot of material.

I think the manufacturing process occasionally pumps out some bad sections. Most processes are less than perfect. I have found it to be rare and fixable. It is less onerous than throwing away mono every year and I get the benefits of the floro.

Super floro is one third thinner than mono, I find that to be a very big deal. I can manage quite big fish with 5X and put some pressure on them to land them quickly. The thinness provides the steath and the refraction index helps a little too. Yeah, it is spendy but a spool last quite a while at only 18" a pop.

Jerry
 

jwg

Active Member
#14
There have been 2 or 3 generations of fluorocarbon line with improvements in quality.
Perhaps your old spool was first generation material, and not as good as what is currently available.

Chemically fluorocarbon polymer is a very stable material.

Regarding the comment about "petroleum products", the fishing expert is neither well informed nor logical. both nylon and , for example, are synthetic carbon based materials, ultimately derived from petroleum feedstocks.

Jay
 

Vladimir Steblina

Retired Forester...now fishing instead of working
#15
There have 2 or 3 generations of fluoro.
Perhaps yor old spool was first generation
But generally it is very stable.

Re petroleum product, both nylon and fluoro are synthetic carbon based materials.

Jay
Ok, Jay for me in SLOW ENGLISH.....what does this mean??

For those of you that never listened to Voice of America......SLOW ENGLISH was a news broadcast for people just learning English. A great concept.

I used it when working.....however, most native (ENGLISH) speakers have a real hard time with the concept.
 

Latest posts